Red-lion DP5T Manuel d'utilisateur télécharger pdf (Page 14)





PROGRAM MODE SECURITY CODE*

By entering any non-zero value, the prompt   will appear when trying

to access the Program Mode. Access will only be allowed after entering a

matching security code or universal code of . With this lock-out, a user input

would not have to be configured for Program Lock-out. However, this lock-out

is overridden by an inactive user input configured for Program Lock-out.













MAXIMUM DISPLAY LOCK-OUT*

MINIMUM DISPLAY LOCK-OUT*

TOTALIZER DISPLAY LOCK-OUT*

These displays can be programmed for  or . When programmed for

, the display will not be shown when the DSP key is pressed regardless of

Program Lock-out status. It is suggested to lock-out the display if it is not needed.

The associated function will continue to operate even if its display is locked-out.

5.3 MODULE 3 - DISPLAY AND PROGRAM LOCK-OUT

PARAMETERS ()

PARAMETER MENU

 to 









RESET TOTALIZER

When activated (momentary action),  flashes and the Totalizer resets to

zero. The Totalizer then continues to operate as it is configured. This selection

functions independent of the selected display.





RESET AND ENABLE TOTALIZER

When activated (momentary action),  flashes and

the Totalizer resets to zero. The Totalizer continues to

operate while active (maintained action). When the user

input is released, the Totalizer stops and holds its value. This

selection functions independent of the selected display.





ENABLE TOTALIZER

The Totalizer continues to operate as long as activated

(maintained action). When the user input is released, the

Totalizer stops and holds its value. This selection functions

independent of the selected display.





SELECT MAXIMUM DISPLAY

The Maximum display is selected as long as activated

(maintained action). When the user input is released, the

Input Display returns. The DSP key overrides the active

user input. The Maximum continues to function

independent of being displayed.





RESET MAXIMUM

When activated (momentary action),  flashes and

the Maximum resets to the present Input Display value. The

Maximum function then continues from that value. This

selection functions independent of the selected display.





RESET, SELECT, ENABLE MAXIMUM DISPLAY

When activated (momentary action), the Maximum value

is set to the present Input Display value. Maximum continues

from that value while active (maintained action). When the

user input is released, Maximum detection stops and holds its





SELECT MINIMUM DISPLAY

The Minimum display is selected as long as activated

(maintained action). When the user input is released, the

Input Display is returned. The DSP key overrides the active

user input. The Minimum continues to function

independent of being displayed.

RESET MINIMUM





When activated (momentary action),  flashes and

the Minimum reading is set to the present Input Display

value. The Minimum function then continues from that value.

This selection functions independent of the selected display.





RESET, SELECT, ENABLE MINIMUM DISPLAY

When activated (momentary action), the Minimum value

is set to the present Input Display value. Minimum continues

from that value while active (maintained action). When the

user input is released, Minimum detection stops and holds









RESET MAXIMUM AND MINIMUM

When activated (momentary action),  flashes and the Maximum and

Minimum readings are set to the present Input Display value. The Maximum and

Minimum function then continues from that value. This selection functions

independent of the selected display.

its value. This selection functions independent of the selected display. The DSP

key overrides the active user input display but not the Minimum function.

value. This selection functions independent of the selected display. The DSP key

overrides the active user input display but not the Maximum function.

* Factory Setting can be used without affecting basic start-up.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Red-lion DP5T Manuel d'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour ordinateurs Red-lion DP5T