Red-lion LEGEND Manuel d'utilisateur télécharger pdf (Page 38)

PROGRAM OPTIONS MODULE

The Program Options module is u sed to program the Operator Accessible

functions, Preset Tracking selections, the Programmable Code value, or load the

Factory Settings. The following flowchart shows only the Options portion:

OPERATOR ACCESS

The Operator Access menu is used with the Program Disable DIP switch

and/or an external User Input selected for program disable. Values can be set for

YES, NO, or LOC. When a value is selected for NO, the operator can view the

value, but CANNOT change it from the front panel keypad (See Front Panel

Accessible Functions With Program Disable for details). Values selected for

LOC do not appear in the displays outside of the programming loop. The

following values can be disabled from front panel access programming:

Preset 1 Preset 4

Preset 2 Counter Load value

Preset 3 Scale Factors

PRESET TRACKING

If Preset Tracking is enabled and a preset value is changed, the preset value that

is tracking it will also change by the same offset. The amount of offset between

presets is changed by changing the preset value doing the tracking first. Example:

Preset 1 is tracking Preset 2. If Preset 2 is 100 and it is desired that Preset 1 occurs

20 counts before Preset 2, the Preset 1 value would be set to 80. If Preset 2 is then

changed to 200,Preset 1 will automatically changeto 180, maintainingthe same 20

count Offset. All presets can be set to track a different preset if they are assigned to

the same function (rate, total, process, etc). If only one preset is selected for a

particular function then that preset cannot be used for preset tracking.

PROGRAM CODE (PRO. CODE)

The value can be programmed from 0 to 99. This value may be required to be

entered bef ore the unit allows access to programming menus, depending on the

level of security that has been chosen. Programming a value of 99 disablesaccess

to programming menus when PGM.DIS. switch is on. Refer to “Front Panel

Accessible Functions with Program Disable.”

-36-

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 74 75

Pas de commentaire

Red-lion LEGEND Manuel d'utilisateur Page 38