Red-lion G3PB Manuel d'utilisateur télécharger pdf

GENERAL DESCRIPTION

The G3 proprietary expansion slot provides a high speed, parallel architecture

that extends the functionality and flexibility of the G3 series HMI. This

approach allows the G3 series to evolve concurrently with the latest advances in

communications and standards, without sacrificing performance. This high

bandwidth channel has significantly greater throughput when compared to the

traditional (external) serial gateway approach.

The G3PB option card adds PROFIBUS DP connectivity to any G3 series

HMI. This allows a high speed exchange of blocks of data, at data rates up to 12

MBaud, between the hosting G3 and a Master PLC on a PROFIBUS network.

The DP suffix refers to “Decentralized Periphery”, which is used to describe

distributed I/O devices connected via a fast serial data link with a central

controller.

The card is easily installed by removing the rear cover of your G3 operator

interface, attaching the card using three screws and connecting a single cable.

SAFETY SUMMARY

All safety related regulations, local codes and instructions that appear in the

literature or on equipment must be observed to ensure personal safety and to

prevent damage to either the instrument or equipment connected to it. If

equipment is used in a manner not specified by the manufacturer, the protection

provided by the equipment may be impaired.

Do not use the controller to directly command motors, valves, or other

actuators not equipped with safeguards. To do so can be potentially harmful to

persons or equipment in the event of a fault to the controller.

CONTENTS OF PACKAGE

- G3PB Option Card with pluggable DB9F connector

- Cable already attached to G3PB option card

- Hardware pack consisting of three screws

- This hardware bulletin

GSD FILE

The GSD file and associated bitmap are part of the Crimson 2.0 installation.

Both files can be found on your PC’s hard drive at C:\Program Files\Crimson

2.0, or on our website at http://www.redlion.net

ORDERING INFORMATION

Use this part number to purchase Crimson

software on CD with a printed

manual, USB cable, and RS-232 cable. Otherwise, download from www.

redlion.net/g3.

MODEL G3PB - PROFIBUS OPTION CARD FOR G3 OPERATOR

INTERFACE TERMINALS

CAUTION: Risk of Danger.

Read complete instructions prior to

installation and operation of the unit.

Connector

(side 2)

mounting holes, 3 plcs.

MODEL NO. DESCRIPTION PART NUMBER

G3PB G3PBDP00

SFCRM2 Crimson 2.0

SFCRM200

 ADDS PROFIBUS DP CONNECTIVITY TO ANY G3 OPERATOR

INTERFACE

 POWERED BY THE G3 OPERATOR INTERFACE

 INSTALLATION AND CONNECTION HARDWARE INCLUDED

WITH CARD

PROFIBUS option card for G3 operator interfaces

Bulletin No. G3PB-D

Drawing No. LP0637

Released 10/10

Tel +1 (717) 767-6511

Fax +1 (717) 764-0839

www.redlion.net

WARNING - EXPLOSION HAZARD - SUBSTITUTION OF ANY

COMPONENT MAY IMPAIR SUITABILITY FOR CLASS I,

DIVISION 2

THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I,

DIVISION 2, GROUPS A, B, C, D, HAZARDOUS LOCATIONS,

OR NON-HAZARDOUS LOCATIONS ONLY

WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT

EQUIPMENT WHILE THE CIRCUIT IS LIVE OR UNLESS THE AREA

IS KNOWN TO BE FREE OF IGNITABLE CONCENTRATIONS.

1 2 3 4

Résumé du contenu

Page 1 - INTERFACE TERMINALS

1GENERAL DESCRIPTIONThe G3 proprietary expansion slot provides a high speed, parallel architecture that extends the functionality and flexibility of t

Page 2 - SPECIFICATIONS

21. POWER REQUIREMENTS:Power is supplied to the option card from the main board of your G3 operator interface.2. COMMUNICATIONS:PROFIBUS Port: FIELDBU

Page 3 - SOFTWARE/UNIT OPERATION

3CONFIGURING A G3PB OPTION CARDThe G3PB is configured using Crimson® software. Crimson is available as a free download from www.redlion.net/g3, or it

Page 4 - LIMITED WARRANTY

LIMITED WARRANTYThe Company warrants the products it manufactures against defects in materials and workmanship for a period limited to two years from